Year of graduation:
2021-05
Maximum registered load on coupling pin: 12 000 kg
Maximum registered axle load: 24 000 kg
Permissible laden mass of the vehicle: 36 000 kg
Maximum technical load per coupling: 12 000 kg
Maximum practical axle load: 27 000 kg
Full vehicle weight:
39 000 kg
Suitable for towing a vehicle according to ISO 1726
5th wheel height without load: 1 150 mm
Full-size chassis design with double T-beam
and transverse beam arrangement, diagonal rear traverse
reinforcements
Neck height: 10 mm (8 mm friction plate)
2-inch coupling pin (front end projection: 1 595 mm)
Rear bumper according to EU standards
Tray/toolbox, ladder at the rear
3 pairs of ferry clamps on the sides and 1 pair on the rear
2 power-operated support legs, lifting capacity 2 × 12 t,
semicircular with support plate, brand name: Krone-choice
Support legs to be controlled from the right
3 axles with a lifting capacity of 9 000 kg each
Distance from coupling pin to centre of axle = 7 460 mm
Wheelbase: 1 310 / 1 310 mm
KRONE axles with air suspension and disc brakes (120 gauge)
Disc brakes 430 mm
Bottom valve, including automatic lowering valve
lowering position with fixed position
Tyres: 6 × 385/65 R22.5
Lighting according to UNECE Regulation No 48
2 number plate lamps (LED)
2 LED contour lights with rubber mounts
LED side marker lights
Electrical cable connections approx. 350 mm above the front
crossings
24 volts, front, with 7-pin socket DIN ISO 1185
7-pin socket DIN ISO 3731 front, for additional applications
Additional power connection for 1S channel at the front; DIN ISO 12098
Full-size plug-in connector (2×7 cont. u/o. 1S cont.), incl.
Junction box front, main cable 9 conductors
Multi-function rear lights,
including 1 fog lamp,
including 1 reversing lamp
Triangular rubber bumpers on the rear frame
2 rubber bumpers at the rear, external, horizontal
Pallet box for 36 euro pallets
Warning: minimum clearance!
Tool box, PVC, left side behind axles, dimensions
approx. 650 × 490 × 450 mm
Fuel tank, plastic, approx. 240 litres, filling opening
both sides, lid with cylindrical lock
Duoplex floor panel
Floor type: BO 13310
Aluminium floor, reinforced at the rear, tested in accordance with
EN 283 - floor load up to 5 500 kg axle load
Tip: Cool Liner standards (Duoplex Steel)
Thermo-motile frost-free panel construction, panels on both sides with
steel outer layer, 100 % without chlorofluorocarbons
Internal length: 13 310 mm
Internal width: approx. 2 460 mm
Reduced internal width due to internal fittings
Interior height: 2 650 mm
Duoplex front wall panel
Sandwich panel with reinforcement and cut-outs
Carrier or Thermo King for the installation of a cooling unit;
impact test according to the Swedish standard
4 vertical airflow profiles on the inner front wall
for optimum air distribution, 100 mm
Front wall with bolted inner protective wall
Duoplex roof panel
Sandwich panel with steel outer layer, integrated cable duct
temperature control unit and lighting system
4 KRONE LED ceiling luminaires, recessed in the roof on the side with offset
Automatic light switch in the door for interior lighting
(rear door)
Duoplex side panel
Sandwich panels with steel outer layer, painted on the outside,
PVC inner covering; floor connected at sides and front with
aluminium bar on both sides, welded (height 300 mm)
Corner aluminium baseboard, recessed in side wall
1 pair of Schlitz-Loch, horizontal,
built into side walls
Duoplex door panel
Double rear container doors, 3 aluminium hinges
for each side of the door; quick-change door sealing system
with external dust protection
1 pair of stainless steel door closing bars
4 manually operated door switches at the rear
Door latch as a cane
Contour and brake lights, upper left and right LEDs
on the bodywork
Aluminium sills inside the rear doors, height 285 mm
Customs seal including customs endorsement (TIR certificate)
2 red/yellow ECE R 70 warning panels in plastic film,
on the rear door, vertically
2 folding TIR signs (1 front / 1 rear)
Air duct with flexible attachment
1 load securing slats (round, 40 mm) for load securing rails
2 load securing beams (round) with rubber caps on both sides
Thermo King SLX i 300-50, diesel/electric,
i-Box with data recorder (CargoWatch), incl. 2 sensors,
electronic modulation, start-stop system,
including installation and commissioning
Refrigerant R 452 A
including installation and connection of an additional temperature sensor
EU certificate of conformity under European rules,
on the basis of an official vehicle type-approval:
e1-2007 146.0232.19
CEMT certificate (Germany)
Vehicle identification certificate
HACCP certificate
ATP Certificate - FRC
Cargo safety certificate according to EN 12642 Code XL